Xiamen TOB New Energy Technology Co., Ltd.

Equipment

TOB-XFZH05 Vacuum Planetary Slurry Mixer

Model · TOB-XFZH05

The TOB-XFZH05 is a vacuum planetary mixer for lab and pilot electrode slurry. It pairs slow planetary mixing at 10–98 rpm with high-speed dispersion at 610–6,100 rpm in an 8 L vessel that holds 2.7–5 L of working batch. A jacket allows heating or cooling, with the chiller supplied by the customer.

Equipment

MR-120 manual hydraulic coin-cell crimper

Model · TOB-MR-120

The TOB-MR-120 is a hand-operated hydraulic press for closing coin cells. The standard die fits CR2032, CR2025 and CR2016 cases, with seal-height adjustment, and optional dies cover CR2325, CR2450, AG3 and AG5. It weighs 28 kg and can sit in a glovebox. It suits labs assembling coin cells by hand.

Equipment

XJB-500 dual-shaft vacuum slurry mixer

Model · TOB-XJB-500

The TOB-XJB-500 is a bench mixer for small batches of electrode slurry. It stirs with two shafts in a closed 500 ml stainless-steel vessel under vacuum, up to 1,000 rpm, with a programmable 0–600 minute timer and a built-in pump. It suits labs developing slurry recipes before moving to larger mixers.

Equipment

DZF-6050 laboratory vacuum drying oven

Model · TOB-DZF-6050

The TOB-DZF-6050 is a bench vacuum oven for drying battery materials, electrode sheets and cell cores in batches. It has a 415 × 345 × 370 mm stainless-steel chamber with two shelves and heats to 250°C. The vacuum pump is optional. It suits labs that dry small batches before assembly.

Equipment

JS100L-LX heated laboratory roll-to-roll calender

Model · TOB-JS100L-LX

The TOB-JS100L-LX is a compact heated roll press for lab electrodes, with two 96 mm rolls heated up to 130°C and a 0–2 mm gap. The model table gives 100 mm cold and 80 mm hot pressing width, while the introduction says 200 mm and 180 mm. Pressure display is an option. It suits labs densifying small electrode samples.

Equipment

FT-500 laboratory electrode slitting machine

Model · TOB-FT-500

The TOB-FT-500 cuts battery electrode material with a pair of upper and lower round knives. TOB lists a 20–500 mm slitting width, material thickness of 100–300 µm and speeds up to 10 m/min. It is a compact 200 kg machine. It suits labs cutting coated foil into strips for cell assembly.

Equipment

JYCM-800 laboratory sheet slot-die coater

Model · TOB-JYCM-800

The TOB-JYCM-800 coats electrode sheets by driving an applicator up to 800 mm across foil held on a heated vacuum plate. A TOB-JY100 slot die is standard, and the page also shows blade and wire-rod methods. After coating, the sheet dries under a cover at up to 130°C. It suits labs comparing coating settings on small samples.

Equipment

ZYJ-02 cylindrical-cell vacuum electrolyte filler

Model · TOB-ZYJ-02

The TOB-ZYJ-02 fills cylindrical cells with electrolyte under vacuum, holding them in clamps on a tray. It takes 18650, 26650 and 32650 cases, with clamps for other sizes on request. TOB lists a 0–7 g dose, ±0.02 g accuracy and one to ten fill repeats. The 18650 tray holds six rows of eight cells.

Equipment

S-DP-150 semi-automatic Z-fold electrode stacker

Model · TOB-S-DP-150

The TOB-S-DP-150 stacks cut electrode sheets into a Z-folded separator fed from a roll. Vacuum pick-ups and positioning place each sheet; the operator loads magazines and removes finished stacks. Electrodes run 80–150 mm long and 30–90 mm wide. TOB quotes 1.3–1.5 s per piece and ±0.5 mm registration. It suits pouch-cell pilot work.

Equipment

Continuous electrode calender for 4680 process development

This TOB continuous roller press calenders electrode web roll to roll. TOB markets it for 4680 tabless cell development. It has two horizontal rollers, a constant-pressure pump station and PLC touchscreen control, takes substrates 150–580 mm wide and runs up to 30 m/min. It suits pilot lines pressing coated electrode to a target density.

Equipment

SL650 laminated-film and separator slitter

Model · TOB-SL650

The TOB-SL650 slits battery separator and aluminium-laminated pouch film into narrow rolls. TOB lists cuts from 650 mm down to 8 mm strips, feed rolls up to 600 mm, 80 m/min speed and ±0.1 mm accuracy, with web guiding and magnetic-powder tension control. It suits cell makers converting their own separator or pouch film.

Equipment

ZY65 electrolyte filling and vacuum diffusion station

Model · TOB-ZY65

The TOB-ZY65 fills cells with electrolyte and then drives it into the cell under vacuum, in one compact 70 kg station. TOB lists it for cylindrical and pouch cells and for use in a glovebox or dry room. Dose range is 0.2–200 mL with ±0.5% accuracy, and the cylindrical fixture holds four 18650 cells.

Equipment

Automatic cylindrical electrode winding system

This TOB automatic winder makes cylindrical jelly rolls. It unwinds and tensions the cathode, anode and separator, guides the webs, winds, tapes the end, unloads and rejects cores that fail a short-circuit test. TOB markets it for 4680 tabless cells, while its table allows at most two tabs per electrode. Electrode widths run 40–68 mm.

Equipment

Dry-electrode adhesive coating and lamination line

This TOB line laminates ready-made dry electrode film onto current-collector foil. It coats conductive adhesive onto the foil by micro-gravure, dries it in a 1 m oven, then presses the film on between heated rollers. Rolling width is 110–320 mm at up to 20 m/min. It suits pilot lines developing the dry-electrode process.