Battery Manufacturing EquipmentShenzhen / Guangdong / China
Shenzhen Geesun Intelligent Technology
Shenzhen Geesun Intelligent Technology (吉阳智能) makes lithium-cell assembly equipment: electrode laser cleaners and laser tab-forming slitters, cylindrical and prismatic winders, and composite stacking lines. Its range also includes negative-pressure formation, capacity grading and OCV testing. Pick the route from your incoming electrode and finished cell design.
- Named entity
- 深圳吉阳智能科技有限公司
- Supply focus
- Electrode laser processing, winding, composite stacking and cell formation and testing
On this page Jump to the information you need
Who Shenzhen Geesun is
Geesun's introduction names the company 深圳吉阳智能科技有限公司 and says it was founded in 2006. Its contact address is Dejin Industrial Park, No.40 Fuyuan 1st Road, Zhancheng Community, Fuhai Subdistrict, Bao'an, Shenzhen. Geesun is the brand used on its website, and the English company name shown here is a translation. Shenzhen Greensun Technology is a different company with its own directory page.
National standard records and a Ministry of Industry and Information Technology list both carry the exact Chinese name. The sources give no unified social credit code. Before ordering, ask for a current business licence and check the contracting entity, registration details and delivery address. The 2006 founding date comes from Geesun's own introduction.
Selected equipment
Laser cleaning, tab forming, winding and stacking
Model · GLC
Manufacturer image not reproduced. Review the equipment description and source records below.
Equipment details →Published parameters
| Parameter | Catalogue value |
|---|---|
| Negative-electrode feed width | 35–160 mm |
| Positive-electrode feed width | 300–650 mm |
| Unit-piece length | 200–2000 mm |
| Claimed cleaning dimensional accuracy | ≤±0.3 mm |
What these details mean for selection
Geesun's laser cleaner removes coating to make patterned bare areas on the electrode. Its tab-forming machine cuts tabs and then divides the electrode with a slitting blade. The two machines do different jobs. The integrated prismatic laser-cut winder forms tabs inside the machine, while the cylindrical winder takes electrodes whose tabs are already cut. A separate large-prismatic winder serves power and storage cells with multi-tab or full-tab designs.
The composite stacking line takes tab-cut rolls and runs electrode cutting, separator lamination, stacking, hot pressing and wrap taping before discharge. Its own page gives the configuration and speed conditions, which differ from a standaloneZ-fold stacker. Geesun also sells negative-pressure formation, capacity grading and OCV, IR and temperature testing, so you can scope those stages apart from electrode and core assembly.
Standards work and the 2023 ministry listing
The national standards service lists Shenzhen Geesun among the drafters of plan 20160533-T-604, General technical requirements for Li-ion battery made machine. That plan became the published standardGB/T38331-2019. Ask Geesun which of its current machines it states conform to that standard, and include the relevant clauses in your acceptance test.
The 2023 ministry PDF lists the company at entry 461 on PDF page 25 for two intelligent-manufacturing scenes: digital product design and production planning optimisation. Shenzhen's industry and development authorities recommended it. The listing covers those scenes only; factory capacity and cell yield need their own checks. Geesun's introduction also gives patent, staff, award and ranking figures, which you can ask it to document during supplier qualification.
Start every trial from your electrode and cell drawing
For laser processing, send the collector and coating materials, thicknesses, pattern geometry and your limits for heat-affected zone, burrs, particles and dimensions. State the product speed you need and how samples will be taken. Geesun's tab-cutting page gives one speed in its introduction and another in its table, so get a signed specification for the configuration you buy. Particle levels and cell output on a new electrode formula come from a trial.
For winding and composite stacking, send the tab pattern, electrode and separator sizes and the finished-core drawing. Agree tension and registration limits, changeover, handling of rejected material and what counts as a good core. Moving from pre-cut electrodes to in-machine tab forming changes the scope of the machine. Plan the incoming feed quality, dust extraction, buffering and traceability to match.
Factory acceptance, line scope and service
Plan a factory-acceptance run with representative material, the approved configuration and a sample plan that traces dimensions, defects and final assembly quality. For a line, list every station, bought-in instrument, guard, extraction unit, control interface and the utilities you must supply. Formation and grading need their own electrical recipes and measurement conditions, and their results come from those stations.
Ask for project training, spare parts, calibration, remote-service terms and recovery instructions for interrupted production. Geesun describes international service and lists customers and awards; write the response time and shipment schedule you need into the contract.
Choose the operation you need
Each dossier explains a separate equipment scope, its catalogue facts and the questions to resolve for your application.
Equipment
Geesun GLC electrode coating-pattern laser-cleaning family
Model · GLC
The Geesun GLC uses a laser to remove coating from calendered or uncalendered electrode rolls, leaving patterned bare areas. The negative version takes 35–160 mm rolls at ≥20 ppm; the positive version takes 300–650 mm rolls at ≥72 ppm. Both list ≤±0.3 mm cleaning accuracy and suit tab and welding-area preparation.
Read the equipment dossier →Equipment
Geesun GWDL/GWFL laser tab-forming and slitting family
Model · GWDL / GWFL
Geesun's GWDL and GWFL laser-cut tabs along calendered electrode rolls and then slit each roll into two lanes with a blade. GWDL takes 120–500 mm rolls at ≥120 m/min, and GWFL takes 150–600 mm rolls at ≥90 m/min. Both list tabs up to 35 mm high and a heat-affected zone of ≤80 µm.
Read the equipment dossier →Equipment
Geesun GPDL integrated laser tab-cutting and prismatic winding machine
Model · GPDL
The Geesun GPDL cuts electrode tabs by laser and winds the positive and negative electrodes with separator into a prismatic core, all in one machine. The table lists 10–45 mm core thickness, ±0.2 mm winding alignment, ±0.5 mm first-tab edge error and ≥5.5 ppm at ≥10 m electrode length. Geesun says it can run AB cores.
Read the equipment dossier →Equipment
Geesun GCBA-3H three-head cylindrical-core winding machine
Model · GCBA-3H
The Geesun GCBA-3H winds tab-cut positive and negative electrodes with separator into cylindrical cores. It has three winding heads that hand work between them, servo closed-loop tension and tab-fold checks. The table lists 20–65 mm diameter, 120–240 mm height, ±0.3 mm alignment and at least 20 ppm, which points to large-format cylindrical cells.
Read the equipment dossier →Equipment
Geesun GPDA-3H large-prismatic three-station winding machine
Model · GPDA-3H
The Geesun GPDA-3H winds large prismatic cores, multi-tab or full-tab, for power and energy-storage cells. Three stations handle winding, separator cutting and taping, and needle withdrawal and unloading. The table lists 8–30 mm thickness, ±0.5 mm alignment and 6 ppm with 5m electrode. Air purification, auto-splicing and short-circuit testing are options.
Read the equipment dossier →Equipment
Geesun GSSF electrode/separator composite stacking machine
Model · GSSF
The Geesun GSSF takes electrode rolls with tabs already cut, cuts the electrode pieces, laminates them with separator and drop-stacks them into cores, followed by hot pressing and wrap taping. The table lists 8–35 mm core thickness, 250–600 mm length, CCD positioning, 480–800 ppm and 0.125 s/piece per table. It suits long stacked cores.
Read the equipment dossier →Equipment
Geesun modular prismatic negative-pressure formation and capacity-grading family
Geesun builds modular prismatic formation and capacity-grading stations on a shared design. Formation uses non-contact micro-negative-pressure and Venturi nozzles at 120 A. Grading uses an integrated probe-bed and power cabinet with internal water cooling at 200 A. Both list up to 32 channels, 0.05 %FS accuracy and ±2 °C temperature uniformity.
Read the equipment dossier →Equipment
Geesun OCV, resistance and temperature tray-test station
Geesun's OCV station tests cell voltage, internal resistance and temperature on two trays, in 2×12,2×10 or 2×8 channel layouts. It has built-in zeroing and master-reference positions. Geesun lists ±0.01%rdg ±3dgt for voltage, ±0.5%rdg ±10dgt for resistance and ±0.5 °C for temperature. It suits post-formation and ageing checks.
Read the equipment dossier →Buyer questions
Can Geesun supply a full cell-manufacturing factory?
Geesun's catalogue covers electrode laser processing, core assembly and some downstream electrical equipment. It shows no single project from slurry mixing to finished cells. If you need a turnkey factory, name your process route and ask for a complete list of stations and interfaces. Machines you already own, new materials and your cell design can change the integration work a great deal.
Sources
How we prepare pages →Each source below is the maker's own page or a public record, with the date it was checked. Ask the factory to confirm the figures for your order in writing.
Show 5 sources
- Official Geesun company introductionGeesun · 2026-10-11 · Manufacturer source
Gives Geesun's Chinese name, founding year, business scope and company figures.
- Official headquarters and market contactGeesun · 2026-10-11 · Manufacturer source
Gives the Shenzhen headquarters address for contact and delivery planning.
- Official process-specific equipment catalogueGeesun · 2026-10-11 · Manufacturer source
Lists Geesun's laser, winding, stacking, formation and testing equipment by process.
- National standard plan20160533-T-604, exact drafting entityOriginal national public record · 2026-10-11 · Public original record
Names Shenzhen Geesun as a drafter of the plan that became GB/T38331-2019.
Read original record ↗ - 2023 intelligent-manufacturing excellent scenes, PDFp25 entry461Original national public record · 2026-10-11 · Public original record
Lists Geesun in 2023 for digital product design and production planning optimisation scenes.
Read original record ↗
Confirm in writing before ordering
- The current business licence, credit code and registered English legal name.
- Throughput and quality on your own electrode materials in a trial.
- Which current machines Geesun states conform to GB/T38331-2019.
- Installation, training and service terms for your project.