Battery Manufacturing EquipmentXiamen / Fujian / China
Xiamen Acey New Energy Technology Co., Ltd.
Xiamen ACEY makes battery laboratory equipment and pack-production stations: cell sorting, pack welding, assembly and charge/discharge testing. Its featured machine is the BA100200-6, a six-channel regenerative pack tester rated 10 to 100 V and up to 200 A, suited to pack acceptance at the end of an assembly line.
- Named entity
- Xiamen Acey New Energy Technology Co., Ltd.
- Supply focus
- Pack assembly equipment and regenerative testing
On this page Jump to the information you need
From assembly stations to pack acceptance
ACEY's official range covers cell sorting, pack joining, assembly stations and charge/discharge testing. These tasks follow one another on a pack line, yet each machine has its own job. A sorting or welding station builds the pack, and the tester decides whether the finished pack passes. ACEY also sells laboratory and pilot equipment for small-format cells.
If you plan a full assembly project, list the build stations and the test instrument as separate items. Your accepted pack drawing, fixture connection and BMS requirements decide the test configuration, even when ACEY quotes assembly and testing together.
ACEY's own account of its business
ACEY says it was founded in 2009 and has delivered more than 300 battery laboratory and pack assembly solutions to customers in over 50 countries. Its catalogue serves two groups. Laboratory groups buy small-format fabrication and test equipment, while pack assemblers buy sorting, stacking, laser cleaning, welding and end-of-line testing for energy-storage, commercial and motive-power packs.
For a buyer, the useful point is that one supplier can quote both the stations that build a pack and the instruments that test it. In that case, write a separate acceptance standard for each station. A welder passes on joint quality; a tester passes on its electrical envelope and records. The cell measurement page explains the OCV and resistance checks that open a pack line.
Selected equipment
ACEY-BA100200-6: voltage, current and power must agree
Model · ACEY-BA100200-6
Manufacturer image not reproduced. Review the equipment description and source records below.
Equipment details →Published parameters
| Parameter | Catalogue value |
|---|---|
| Channel count | 6 |
| Current | 0.1..200 A |
| Voltage | 10..100 V |
What these details mean for selection
ACEY's featured machine is the ACEY-BA100200-6 Regenerative Pack Test System. It has six channels rated 10 to 100 V and up to 200 A, and it returns discharge energy to the supply. Its page shows how to read the voltage, current and power limits as one envelope. You can find the rest of ACEY's machines on BatteryEquip in the portfolio below.
Specifying the BA100200-6 for your pack
ACEY sells assembly and testing as one offer, but specify the BA100200-6 cabinet against your own pack. Ask the proposal to list the pack connection, external protection, energy-feedback installation and software support as separate supplied items. Agree who carries out the facility-side installation and which test run must pass before all six channels operate together.
A 2025 survey of lithium-ion manufacturing equipment lists Xiamen ACEY in a supplier table and states that the table data comes from manufacturer websites. It places ACEY among known equipment makers. It gives no test data for the cabinet, so the operating envelope with all channels loaded and the behaviour after a power interruption belong in a project demonstration.
A 2026 experimental paper names an ACEY-HRP100 press in its electrode preparation. That shows ACEY equipment in use at a university lab, though the press is a different product family. Ask for BA100200-6 current accuracy, energy return and loaded-channel results directly from ACEY.
Choose the operation you need
Each dossier explains a separate equipment scope, its catalogue facts and the questions to resolve for your application.
Equipment
ACEY-BA100200-6 Regenerative Pack Test System
Model · ACEY-BA100200-6
ACEY-BA100200-6 is a six-channel regenerative charge/discharge tester for battery packs. Each channel covers 10–100 V and 0.1–200 A with 20 kW rated power, and logs at intervals down to five seconds. It suits pack cycling and end-of-line checks where ordinary cycle records are enough.
Read the equipment dossier →Equipment
ACEY-SP1200 prismatic module stacking and compression station
Model · ACEY-SP1200
ACEY-SP1200 lines up finished prismatic cells and compresses them before the module is strapped. A servo motor and planetary reducer drive a screw module over a 1200 mm stroke, with a 500 KG maximum load setting. It handles cells 50–250 mm long and suits module assembly after cell production.
Read the equipment dossier →Equipment
ACEY-LWM gantry and galvanometer battery busbar laser welder
Model · ACEY-LWM
ACEY-LWM is a fibre-laser welding family for battery PACK busbars. A galvanometer scan head rides on an XY gantry, and ACEY offers 1500, 2000, 3000, 4000 and 6000 W sources at 1070 nm. It is aimed at aluminium and copper busbar joints on prismatic cell modules.
Read the equipment dossier →Equipment
ACEY-D300B double-sided cylindrical PACK spot welder
Model · ACEY-D300B
ACEY-D300B is an automatic double-sided resistance spot welder for cylindrical battery packs. It pairs a gantry with 400 mm X and 500 mm Y travel and a transistor supply rated at 10000 A peak. It is built for tab connections on packs of cells such as 18650, and the right settings come from a weld trial on your own tabs.
Read the equipment dossier →Equipment
ACEY-PS8 prismatic OCV and internal-resistance cell sorter
Model · ACEY-PS8
ACEY-PS8 measures open-circuit voltage and internal resistance on prismatic cells, then sorts them into seven grades plus a reject channel. Cells up to 300 mm long are loaded by hand and tested automatically, with a quoted rate of up to 1000 cells per hour. It fits incoming-cell grouping before PACK assembly.
Read the equipment dossier →Equipment
ACEY-PVM-5L planetary dispersion slurry mixer
Model · ACEY-PVM-5L
ACEY-PVM-5L is a vacuum planetary mixer for electrode slurry. Two slow stirring shafts, a 0–6000 rpm dispersing disc and a wall scraper work in a water-jacketed SUS304 vessel with hydraulic lift. The table lists 2L effective volume despite the 5L name, so confirm the vessel size before planning batches.
Read the equipment dossier →Equipment
ACEY-PVM-250ML programmable vacuum slurry mixer
Model · ACEY-PVM-250ML
ACEY-PVM-250ML is a benchtop dual-shaft vacuum mixer for small electrode-slurry batches. It runs three programmed speed stages up to 600 rpm in forward or reverse, with a built-in vacuum pump and optional tanks from 150 to 500 ml. Lab teams use it to develop and repeat slurry recipes before scale-up.
Read the equipment dossier →Equipment
ACEY-SF-1-500ML laboratory electrode-slurry filter
Model · ACEY-SF-1-500ML
ACEY-SF-1-500ML is a benchtop SUS304 filter that screens up to 500 ml of electrode slurry before lab coating. It ships with 80, 100 and 150 mesh screens, finer screens are optional, and a small vacuum generator pulls the slurry through. It suits removing oversized particles from sample batches.
Read the equipment dossier →Equipment
ACEY three-roll transfer electrode coater with three-zone oven
This ACEY roll-to-roll coater applies electrode slurry by three-roll transfer with comma metering, then dries it in three 1.5 m hot-air oven zones. The roller face is 400 mm, coating width at least 330 mm, and it runs continuous or intermittent patterns on 8–30 µm aluminium or copper foil.
Read the equipment dossier →Equipment
ACEY-SSM-C Z-fold electrode sheet stacker
Model · ACEY-SSM-C
ACEY-SSM-C builds stacked cell cores by Z-folding separator between cathode and anode sheets. The operator loads the sheet magazines; a manipulator picks and places each sheet while servo tension feeds the separator. Sheets from 62 × 46 mm to 200 × 200 mm and stacks up to 30 mm thick are listed.
Read the equipment dossier →Equipment
ACEY flat-cell double-needle electrode winder
ACEY sells this semi-automatic winder for flat electrode cores in mobile-phone pouch cells. The operator feeds the electrodes and the machine winds them on an adjustable double trapezoid needle. Cores run 40–100 mm wide, 30–100 mm long and 10 mm thick, and winding speed is set on a touchscreen.
Read the equipment dossier →Sources
How we prepare pages →Each source below is the maker's own page or a public record, with the date it was checked. Ask the factory to confirm the figures for your order in writing.
Show 5 sources
- Company and supply-scope recordXiamen Acey New Energy Technology Co., Ltd. · 2026-10-07 · Manufacturer source
ACEY's own company information, including its founding year, delivery count and the buyer groups it serves.
- ACEY-BA100200-6 Regenerative Pack Test SystemXiamen Acey New Energy Technology Co., Ltd. · 2026-10-07 · Manufacturer source
The product page for the six-channel pack tester, with its voltage, current, power and logging figures.
- Official portfolio contextXiamen Acey New Energy Technology Co., Ltd. · 2026-10-07 · Manufacturer source
ACEY's product range, showing which sorting, welding, assembly and test machines it offers.
- 2025 LIB process equipment review: supplier-table contextEurope PMC / EMBL-EBI full text of the published review · 2026-10-11 · Public original record
Table 1 of this survey lists Xiamen ACEY among battery equipment makers, using data taken from manufacturer websites.
Read original record ↗ - 2026 experimental paper: ACEY-HRP100 electrode preparationDiVA academic repository; Luleå and Umeå university authors · 2026-10-11 · Public original record
The methods in Section 2.2 credit Xiamen Acey for the ACEY-HRP100 press that made the study's electrodes.
Read original record ↗
Confirm in writing before ordering
- The current, voltage and power available when all six channels run at once, and the facility supply this needs.
- How the cabinet recovers after a power interruption and what data is kept from the interrupted step.
- Which legal entity will sign the contract and supply the BA100200-6.