Battery Manufacturing EquipmentACEY-BA100200-6 Regenerative Pack Test System
ACEY-BA100200-6 is a six-channel regenerative charge/discharge tester for battery packs. Each channel covers 10–100 V and 0.1–200 A with 20 kW rated power, and logs at intervals down to five seconds. It suits pack cycling and end-of-line checks where ordinary cycle records are enough.
By Xiamen Acey New Energy Technology Co., Ltd. · ACEY-BA100200-6
ACEY-BA100200-6: voltage, current and power must agree
ACEY lists six independently controlled channels. Each runs from 10 to 100 V, with charge/discharge current from 0.1 to 200 A and 20 kW rated power. Ask for the allowed voltage, current and power combinations for your pack sequence and for the number of channels you will load at once, instead of comparing the current headline alone.
Four-wire connection keeps the current leads apart from the voltage sense leads. The software saves cycle, process and detail records at intervals of five seconds or longer, and exports them as spreadsheets or charts. That suits ordinary cycling history. Short transient events need faster capture than this.
The product page states its own electrical installation requirement for the cabinet, which differs from adding up nominal channel power. Ask the supplier to state facility input, energy-feedback operation and peak channel loading for the configuration you buy. Plan the pack connection and protection with ACEY as well, since matching nominal voltage is only one part of the installation.
| Parameter | Published value | Record status |
|---|---|---|
| Channel count | 6 | known |
| Current | 0.1..200 A | known |
| Voltage | 10..100 V | known |
Catalogue values apply to the configuration and test method the maker states. Ask for the values that apply to your configuration.
Source references: s2
Demonstrate interrupted operation and traceable results
ACEY's software offers continuation after an interrupted run and lets users set protection conditions. Ask to see both with your test recipe and pack fixture. The demonstration should show which step was interrupted, which measurements were kept and how the restart decision is made. Your own pack's safe limits still come from your pack design team, and the cabinet must be set to them.
Before ordering, request time-stamped records and a sample export. Name the events that must appear in the record. If your test needs observations faster than five seconds, ask ACEY for a separate acquisition proposal and a demonstration of the faster capture.
Buying guidance from BatteryEquip.
What the published documents cover
ACEY's official pages describe the product range and this tester. Promotional pages also mention factory area, export countries and certificates; ask for documents that apply to your order and destination. Ask for performance results from the cabinet itself and for the destination approvals your site needs.
Buying guidance from BatteryEquip.
Test the quoted simultaneous load rather than multiplying channel headlines
Send the supplier a channel-by-channel pack programme with every charge and discharge step and the overlap between channels. Ask for the allowed voltage-current-power combinations and the facility demand for that schedule. Six channels can each reach a headline maximum on paper; agree in writing which combinations run continuously together.
Keep the settings and exported data from the agreed loaded trial. Check recovery after an interruption before you accept a long cycling programme. If short transients matter in your lab work, state their duration and the saved-data resolution you need. Five-second logging covers cycling history, and faster events need their own acquisition. A supplier table in a survey paper adds no electrical limits.
The 2026 experimental paper concerns ACEY-HRP100 electrode pressing, a different machine. For this purchase, request the BA100200-6 test programme, calibrated measurements and an exported six-channel result.
Cells are usually sorted by voltage and resistance before pack testing, as the cell measurement page describes. The battery tester page shows how to read a 20 kW per-channel rating against the voltage and current limits.
Questions that change the purchase
| Decision | What the catalogue says | Next step |
|---|---|---|
| Can all requested channels run together? | The catalogue gives 10–100 V, 0.1–200 A and 20 kW per channel, plus a separate cabinet installation requirement. | Send your simultaneous operating points and ask for the electrical-load schedule. |
| Will the saved file show the event? | The catalogue gives a minimum logging interval of five seconds. | Request a programme export and a time-stamped sample record. |
Equipment questions
Can all six channels run at peak load together?
Independent control means each channel runs its own programme. How much each can deliver when all run at once depends on voltage, current, power and the facility supply, so agree that envelope and the installation with ACEY.
Source s2Is five-second logging enough for pulse analysis?
Five seconds suits a cycling record. For shorter events, state the event duration and the resolution you need, then ask ACEY to demonstrate capture at that rate.
Source s2Prepare the supplier conversation
Fill in the conditions below and ask the supplier to answer each open point in writing. Copying or downloading stays in your browser; nothing is sent.
Sources and check dates
The maker's own pages and public records used for this page, each with the date it was checked.
s1 · Company and supply-scope record
Xiamen Acey New Energy Technology Co., Ltd. · Manufacturer-origin source
ACEY's company information and the scope of equipment it supplies.
Archived source check: 2026-10-07
s2 · ACEY-BA100200-6 Regenerative Pack Test System
Xiamen Acey New Energy Technology Co., Ltd. · Manufacturer-origin source
The tester's product page, giving channel count, voltage, current, power, wiring and logging interval.
Archived source check: 2026-10-07
s3 · Official portfolio context
Xiamen Acey New Energy Technology Co., Ltd. · Manufacturer-origin source
ACEY's wider product range, useful for seeing which other pack-line stations it can quote.
Archived source check: 2026-10-07
s4 · 2025 LIB process equipment review: supplier-table context
Europe PMC / EMBL-EBI full text of the published review · Public original record
Table 1 lists Xiamen ACEY among battery equipment makers, with data drawn from manufacturer websites.
Archived source check: 2026-10-11
Read original record →s5 · 2026 experimental paper: ACEY-HRP100 electrode preparation
DiVA academic repository; Luleå and Umeå university authors · Public original record
Section 2.2 names the ACEY-HRP100 press as the electrode press used in the study.
Archived source check: 2026-10-11
Read original record →Still to confirm
- The voltage, current and power each channel can hold when all six run your schedule together.
- The facility power supply and energy-feedback installation needed for that schedule.
- How a run resumes after an interruption and which measurements are kept.
- Whether faster data capture than five seconds is available if your tests need it.
- Which legal entity will sign the contract for the BA100200-6.
Six-channel regenerative cycling of battery packs
- Pack voltage and current programme
- Channels loaded at the same time
- Required record interval
- Power supply and regenerative-energy arrangement