Battery Manufacturing EquipmentXiamen / Fujian / China
Xiamen AOT Battery Equipment Technology Co., Ltd.
Xiamen AOT supplies laboratory equipment for coin, pouch and cylindrical cells, plus battery materials and pilot-line proposals. Its featured machine is the AOT-PVM-10L planetary mixer with a ten-litre effective volume, suited to laboratory and pilot slurry work.
- Named entity
- Xiamen AOT Battery Equipment Technology Co., Ltd.
- Supply focus
- Laboratory cell equipment and planetary mixing
On this page Jump to the information you need
Who builds and who supports each item
AOT's Xiamen company page lists coin, pouch and cylindrical cell equipment, raw materials and battery-development support. It describes its own manufacturing base and also names subcontracting factories. When you request a quotation, ask AOT to name the maker of each quoted machine, who integrates the package and who gives technical support after delivery.
The company page and the product pages give different staffing figures, so treat headcount as approximate. Customer logos and laboratory photos on the promotional pages show where AOT has sold equipment. Your own acceptance trial is what decides whether the mixer suits your slurry.
A small Xiamen workshop with a wide laboratory range
AOT describes manufacturing facilities of about 4,000 square metres and a staff of more than 50; another page gives more than 65. It says its export team has over fifteen years of experience and that it has supplied projects in Europe, Asia and the Americas. Like several Xiamen laboratory suppliers, it pairs its own workshop with subcontracting factories.
The range on BatteryEquip follows that pattern: mixers, laboratory coaters, calenders, vacuum drying ovens and pouch-cell sealers, built for development work rather than mass production. A laboratory that wants one point of contact gains from this. Confirm, machine by machine, who manufactures each item and who will commission it on site, because support relies on remote help and on-site visits.
Selected equipment
AOT-PVM-10L: a ten-litre effective volume
Model · AOT-PVM-10L
Manufacturer image not reproduced. Review the equipment description and source records below.
Equipment details →Published parameters
| Parameter | Catalogue value |
|---|---|
| Mixing volume | 10 L |
| Contact material | 304 stainless steel |
| Mixing speed | 0..100 rpm |
What these details mean for selection
The featured machine is the AOT-PVM-10L Double Planetary Mixer, with a ten-litre effective volume for laboratory and pilot slurry. Its page covers the vessel, the stirring tools, and why cleaning and discharge belong in the formulation trial. AOT's other machines on BatteryEquip appear in the portfolio below.
Contracts, commissioning and a published supply reference
A 2025 sodium-oxygen battery paper names Xiamen AOT Battery Equipment Technology Co. as the supplier of sodium chips in its experimental methods. This shows AOT selling laboratory materials under its own name. The paper did not use or test the AOT-PVM-10L mixer.
AOT's company description covers both its manufacturing base and its subcontracting factories. For a mixer order, write into the contract the contracting company, the actual manufacturer, the vacuum arrangement to be installed and the engineer responsible for commissioning. Order any battery materials under a separate line, so the mixer's acceptance and after-sales terms stand on their own.
Choose the operation you need
Each dossier explains a separate equipment scope, its catalogue facts and the questions to resolve for your application.
Equipment
AOT-PVM-10L Double Planetary Mixer
Model · AOT-PVM-10L
The AOT-PVM-10L is a double planetary mixer for laboratory and pilot electrode slurry. It has a 14 L design vessel with 10 L effective volume, revolution of 0–50 rpm, rotation of 0–100 rpm, a rotary-vane vacuum pump and electric lifting, and suits medium- to high-viscosity mixtures.
Read the equipment dossier →Equipment
AOT DZF-6210-L 210 L vacuum drying oven
Model · AOT-DZF-6210-L
The AOT DZF-6210-L is a general-purpose 210 L vacuum drying oven with a SUS304 chamber, three partitions, a range up to 250°C and vacuum below 133 Pa. A 4 L/s pump and inert-gas filling are options. It suits drying battery electrodes and assembly parts in a laboratory.
Read the equipment dossier →Equipment
AOT-listed MSK-HRP-04 heated electrode sheet calender
Model · AOT-MSK-HRP-04
AOT lists the MSK-HRP-04 as a bench heated roll press for thin electrodes and soft materials. It has a 200 mm effective roller width, two separately heated rollers up to 200°C and an adjustable 0–1.2 mm gap, and suits laboratory calendering trials on coated foil.
Read the equipment dossier →Equipment
AOT MSK-115B-L pouch-cell secondary vacuum sealer
Model · AOT-MSK-115B-L
The AOT MSK-115B-L is a secondary vacuum sealer for pouch cells. It pierces the gas pocket, vacuums, drains electrolyte and heat-seals, with a 330 mm effective seal length and pouches up to 330 × 330 × 20 mm. The operator loads and clamps each cell; the process sequence then runs automatically.
Read the equipment dossier →Equipment
AOT SY300J three-roll intermittent laboratory coater
Model · AOT-SY300J
The AOT SY300J is a three-roll transfer coater with a comma blade for laboratory and pilot electrode coating. It runs continuous or intermittent patterns, with servo tension, photoelectric web guiding, servo unwinding and rewinding, and a hot-air oven that blows from top and bottom.
Read the equipment dossier →Equipment
AOT XHT-5539L vertical intermittent electrode coater
Model · AOT-XHT-5539L
The AOT XHT-5539L is an intermittent electrode coater with a 15 m oven. It takes aluminium foil 300–520 mm wide and copper foil 300–502 mm wide, slurry of 1500–15000 cP, and coats at up to 10 m/min against a 15 m/min mechanical speed. AOT publishes detailed tolerances for segments, gaps and overlay.
Read the equipment dossier →Equipment
AOT DHL060L dual-planetary slurry dispersion mixer
Model · AOT-DHL060L
The AOT DHL060L pairs low-speed planetary blades with two high-speed dispersing shafts in an 88 L vessel that holds a 60 L working batch. AOT lists −0.098 MPa vacuum, a cooled jacket, hydraulic lift and 20 kW power, for pilot-scale electrode slurry.
Read the equipment dossier →Equipment
AOT ESC-500 electrode roll-to-sheet crosscutter
Model · AOT-ESC-500
The AOT ESC-500 cuts continuous or intermittently coated electrode rolls into sheets. It takes electrodes up to 500 mm wide, sets cut lengths from 1 to 20000 mm, and uses servo feed rollers, a pneumatic cutter and colour-mark tracking, at up to 4000 cuts per hour.
Read the equipment dossier →Sources
How we prepare pages →Each source below is the maker's own page or a public record, with the date it was checked. Ask the factory to confirm the figures for your order in writing.
Show 4 sources
- Company and supply-scope recordXiamen AOT Battery Equipment Technology Co., Ltd. · 2026-10-07 · Manufacturer source
AOT's own company description, covering its product range, workshop size, staff figures and use of subcontracting factories.
- AOT-PVM-10L Double Planetary MixerXiamen AOT Battery Equipment Technology Co., Ltd. · 2026-10-07 · Manufacturer source
The product page for the ten-litre mixer, with vessel volume, stirring speeds, vacuum and lifting details.
- Official portfolio contextXiamen AOT Battery Equipment Technology Co., Ltd. · 2026-10-07 · Manufacturer source
AOT's product listing, showing the coaters, calenders, ovens and sealers offered alongside the mixer.
- 2025 sodium-oxygen electrolyte study: AOT material-supply referenceEurope PMC / EMBL-EBI full text of the published paper · 2026-10-11 · Public original record
The methods section names Xiamen AOT Battery Equipment Technology Co. as the supplier of the sodium chips used in the study.
Read original record ↗
Confirm in writing before ordering
- The contracting company, the actual manufacturer of the mixer, and which parts a subcontracting factory builds.
- A trial on your working charge, with the dispersion endpoint, discharge yield and cleaning time recorded.
- Who commissions the machine on site and what remote support covers after delivery.