Battery Manufacturing EquipmentXiamen / Fujian / China
Xiamen Tmax Battery Equipments Limited
Xiamen TMAX builds battery laboratory equipment and larger production-line configurations, from mixers and coaters to calenders and formation stations. Its lead machine here is the TMAX-300-H400 heated calender, with a 300 mm usable pressing width on a 400 mm roll, suited to electrode rolling trials and pilot lines.
- Named entity
- 厦门天美福机械设备有限公司
- Supply focus
- Heated electrode rolling with matched web handling
On this page Jump to the information you need
Laboratory cells, production lines and more from one Xiamen catalogue
TMAX's Xiamen site splits its range into laboratory cell equipment and larger production-line builds. It also sells furnaces, coating machines and presses for work outside batteries. The company page says it makes equipment in its own base factory and also through subcontracting factories. For any project, name in the contract which entity builds the chosen machine and which party handles integration, commissioning and warranty.
The company page shows certificates and names customers. Ask TMAX for current copies of any certificate your project needs. The English trading name and the registered Chinese company should both appear on the contract documents.
How big TMAX is and how it builds
TMAX gives roughly 200,000 square feet of manufacturing space and more than 230 staff on one page. Another page shows 245 workers, six patents and twenty years in the trade. The two pages differ, so read the numbers as a rough scale. The more useful fact for a buyer is that TMAX combines its own base factory with subcontracting factories.
Many Xiamen laboratory-equipment makers work this way, and it causes no trouble when the paperwork is clear. Write down who builds the quoted machine, who commissions it and who handles warranty claims. For a heated calender, also agree where the factory acceptance test will run and which electrode TMAX will press during it.
The TMAX range on BatteryEquip also covers a heated sheet doctor-blade coater, an intermittent web coater, a dual-shaft vacuum mixer and a pouch-cell formation station. Each has its own page.
Selected equipment
TMAX-300-H400: a 400 mm roll with 300 mm of usable width
Model · TMAX-300-H400
Manufacturer image not reproduced. Review the equipment description and source records below.
Equipment details →Published parameters
| Parameter | Catalogue value |
|---|---|
| Roll diameter | 300 mm |
| Roll width | 400 mm |
| Maximum effective pressing width | 300 mm |
What these details mean for selection
The featured machine is the TMAX-300-H400 Heated Electrode Roller Press. Its page sets out why the usable pressing width is narrower than the 400 mm roll face and lists what a heated rolling trial should record. The portfolio further down lists more TMAX machines on BatteryEquip.
From a university hot-roller reference to your own roll-to-roll trial
Supporting information for a 2025 study held by the University of Chicago names Xiamen TMAX Battery Equipments Limited as the maker of a vertical hot roller used to prepare dry film. The paper gives no model number, so it may or may not be the TMAX-300-H400. It shows TMAX equipment in use in a university laboratory.
For the heated press itself, plan around the 300 mm usable width and ask for a trial with the quoted unwinder, press and rewinder running together. That trial shows tension behaviour, installed runout and output for this exact configuration. The model-specific proposal should also name the contracting entity and the party that commissions the line.
Choose the operation you need
Each dossier explains a separate equipment scope, its catalogue facts and the questions to resolve for your application.
Equipment
TMAX-300-H400 Heated Electrode Roller Press
Model · TMAX-300-H400
The TMAX-300-H400 is a heated roll-to-roll electrode calender with 300 mm diameter rollers on a 400 mm face. Usable pressing width is up to 300 mm. Oil-heated solid rollers, a servo roll gap and matched unwinding and rewinding make it a fit for pilot lines and electrode density trials.
Read the equipment dossier →Equipment
SF120 manual hydraulic coin-cell crimper
Model · TMAX-SF120
The TMAX SF120 is a hand-operated hydraulic crimper for sealing coin cells in the laboratory. It comes with a die for CR2032, CR2025 and CR2016, uses a PTFE core to reduce short circuits during crimping, and weighs 25 kg, compact enough for many gloveboxes. Other case sizes take optional dies.
Read the equipment dossier →Equipment
Electric CR20XX coin-cell crimping station
TMAX's electric CR20XX crimper seals coin cells with a 24 V DC geared motor under touchscreen control, behind a plexiglass shield with a safety interlock. It ships with CR2032, CR2025 and CR2016 dies, weighs 32 kg and is sized to pass a 360 mm glovebox antechamber for laboratory cell assembly.
Read the equipment dossier →Equipment
TMAX-JK-TMJ-200 heated sheet doctor-blade coater
Model · TMAX-JK-TMJ-200
TMAX-JK-TMJ-200 is a bench doctor-blade coater for single electrode sheets. A vacuum plate holds the foil, a 100 mm micrometer blade travels at 0–120 mm/s, and a heated cover dries the film at up to 200°C. It suits small laboratory electrode and film trials on sheets up to 100 × 250 mm.
Read the equipment dossier →Equipment
TMAX-MRX300 intermittent electrode web coater
Model · TMAX-MRX300
TMAX-MRX300 is a compact reverse-comma transfer coater for cathode and anode webs, running continuous or intermittent patterns up to 300 mm wide. TMAX lists 20–200 µm dry thickness and a 710 mm drying oven at up to 150°C. It fits pilot electrode trials and small-roll runs on 380 V power.
Read the equipment dossier →Equipment
TMAX-JR135 operator-loaded cylindrical cell winder
Model · TMAX-JR135
TMAX-JR135 is an operator-loaded winder for cylindrical cell jelly rolls. A powered shaft turns at 0–170 rpm in either direction, and the listed 4 mm mandrel covers 18650, 26650, 32650 and 21700 cells from 10–150 mm high. It suits laboratory and small-batch winding where an operator places the electrodes and separator.
Read the equipment dossier →Equipment
TMAX-111A-D three-magazine pouch electrode stacker
Model · TMAX-111A-D
TMAX-111A-D is a pouch electrode stacker with three hand-loaded sheet magazines, automatic alignment and servo-controlled separator feed. It takes standard sheets from 40 × 40 to 160 × 160 mm, stacks up to 100 layers or 10 mm, and TMAX aims it at solid-state battery laboratories and pilot cell work.
Read the equipment dossier →Equipment
TMAX heated force-controlled pouch-cell formation station
TMAX's heated formation station clamps pouch cells at 200–3000 kgf while charging them at 10–6000 mA up to 5000 mV. The table describes 16 layers of two cells, 32 in total, heated to 90°C, with manual loading and automatic control. It suits pouch and solid-state cell formation in laboratories and pilot lines.
Read the equipment dossier →Equipment
TMAX programmable 500 ml dual-shaft vacuum slurry mixer
This TMAX bench mixer prepares small batches of electrode slurry and ceramic paste in a 500 ml tank. Two shafts with spiral paddles turn at up to 600 rpm, a three-stage program runs for up to 600 minutes, and a built-in pump pulls vacuum to a −0.08 MPa reading. It weighs 35 kg and suits laboratory formulation work.
Read the equipment dossier →Sources
How we prepare pages →Each source below is the maker's own page or a public record, with the date it was checked. Ask the factory to confirm the figures for your order in writing.
Show 4 sources
- Company and supply-scope recordXiamen Tmax Battery Equipments Limited · 2026-10-07 · Manufacturer source
Company information from TMAX covering factory size, staff numbers, in-house and subcontracted manufacturing, and product groups.
- TMAX-300-H400 Heated Electrode Roller PressXiamen Tmax Battery Equipments Limited · 2026-10-07 · Manufacturer source
The catalogue page for the heated calender, with roll size, usable width, heating and winding options.
- Official portfolio contextXiamen Tmax Battery Equipments Limited · 2026-10-07 · Manufacturer source
TMAX's product listing, useful for seeing which mixers, coaters, presses and formation units it offers.
- 2025 solid-state pouch-cell study: supporting information, experimental methodsUniversity of Chicago repository / ACS Energy Letters authors · 2026-10-11 · Public original record
On page S2, a vertical hot roller for dry film is credited to Xiamen TMAX Battery Equipments Limited; no model number is given.
Read original record ↗
Confirm in writing before ordering
- The contracting entity, the factory that builds the quoted machine, and who commissions it and handles warranty.
- Installed roll runout and the usable width achieved on your electrode in the trial.
- Heated rolling acceptance criteria for thickness, density and surface finish on your material.