Battery Manufacturing EquipmentWuhan / Hubei / China
Wuhan Andxin Testing Equipment
Wuhan Andxin makes environmental reliability test equipment: temperature and humidity chambers, thermal shock chambers, walk-in rooms and ageing equipment for electronics, auto parts and general industry. It also builds custom walk-in rooms for battery projects, where each model's temperature range and permitted samples decide whether it fits your cells, modules or packs.
- Named entity
- 武汉安德信检测设备有限公司
- Supply focus
- Environmental test chambers and custom walk-in rooms for battery testing
On this page Jump to the information you need
What Andxin makes and where it is based
The registered company is 武汉安德信检测设备有限公司. Its introduction describes the development, production and sale of reliability-environment equipment and quality-control instruments. The range includes temperature and humidity chambers, thermal shock chambers, walk-in rooms, ageing equipment and other environmental tests for electronics, automotive components and general industry. For a battery buyer, that makes Andxin a source of test chambers to sit beside your production line.
The factory and contact address is the ground-floor workshop in Area A of Fengshu Industrial Park, Dongfeng Avenue, in the Wuhan Economic and Technological Development Zone. Andxin mentions pre-sales advice and maintenance. If you are overseas, ask for written terms on commissioning, response times and spare parts at your site.
The company logo carries the English name Wuhan Andxin Testing Equipment Co., Ltd. next to the Chinese name. Before you order, confirm the contracting entity and invoicing details, and that the company behind the website is the one that will deliver the equipment.
Selected equipment
Walk-in room and benchtop chamber limits
Model · ADX-BHW-30A
Manufacturer image not reproduced. Review the equipment description and source records below.
Equipment details →Published parameters
| Parameter | Catalogue value |
|---|---|
| Listed temperature range | −40°C to ambient |
| Published empty-room temperature fluctuation | ±0.5 °C |
| Published empty-room uniformity | Within ±3 °C |
| Listed installed capacity | 50 kW |
| Panel insulation thickness | 100 mm |
| Described data interface | RS-232 |
What these details mean for selection
Andxin's ADX-BHW-30A is a walk-in room built to size, with water-cooled refrigeration, forced air circulation inside, a SUS304 lining, a double door and an RS-232 port. Its own table gives a range of −40°C to ambient. The −70°C to 150°C range in Andxin's general battery article refers to other custom projects. The room's cooling and warming times are given for an empty room, so expect slower response with a battery load that gives off heat.
The ADX-TH-100B temperature and humidity chamber covers 0°C to 150°C. Its listing bans flammable and explosive samples and samples that give off volatile or corrosive gas. That makes it a general-purpose chamber, and a poor match for energised lithium cells. For battery work, ask Andxin for a written sample scope for the exact model you are buying.
Pick one documented configuration and keep its temperature range, fitted protections and test conditions together in the quote. When comparing models, compare these three items side by side.
Battery protection features to specify by name
Andxin's battery application article describes custom walk-in testing with pressure relief, fire-resistant seals and multi-point temperature measurement. The ADX-BHW-30A listing does not list all of those features. An explosion-protected lamp protects the lighting circuit only, so ask separately how the room handles a cell thermal event.
Tell Andxin whether your samples are inert parts, cells, modules or packs, whether they will be energised, their chemistry and energy, and the test procedure. Ask Andxin to confirm in writing which samples are allowed and which protections are fitted. Fault monitoring, gas handling, emergency response and test-cell wiring each need a project review. If you need thermal-runaway, abuse or explosion-containment capability, put that requirement in the specification and ask Andxin to state how the room meets it.
A 2023 Wuhan subsidy record
Wuhan Municipal Science and Technology Bureau document Wu Ke [2023] No. 56 allocates subsidies to technology enterprises. Entry 995, on page 56 of its attachment, names 武汉安德信检测设备有限公司 in the section for enterprises first recognised as high-tech enterprises in 2022.
That is a dated administrative record for the same company. Ask Andxin for its current 2026 certificates if you need them. Andxin's site cites EN, DIN, ASTM, GB and other standards. Ask which standard and test method each model meets, with the supporting documents for the chamber you order.
Build the enquiry around loaded conditions and commissioning
In your enquiry, send sample sizes, mass, fixtures, heat output and the temperature and humidity sequence you need. Ask for a loaded temperature map, the sensor positions, a definition of stable conditions and the test conditions behind each transition time. A densely loaded battery fixture behaves differently from an empty room, so make the loaded map part of acceptance.
For a walk-in room, cover cooling water, electrical supply, doors and access route, floor load spread and service clearance. Agree calibration, data export and commissioning criteria, and confirm which local or overseas service tasks Andxin will carry out. The RS-232 port gives data output; ask how it connects to your battery test system and which fields it sends.
Buyer questions
Does Andxin supply cell manufacturing equipment?
No. Andxin makes environmental reliability equipment and discusses battery testing as an application. For electrode coating, cell winding, electrolyte filling or a full cell factory, look to the production-equipment makers in this directory. Andxin's role is environmental test chambers, chosen model by model.
Sources
How we prepare pages →Each source below is the maker's own page or a public record, with the date it was checked. Ask the factory to confirm the figures for your order in writing.
Show 6 sources
- Official company introductionWuhan Andxin · 2026-10-11 · Manufacturer source
Andxin's description of its company and its range of environmental test equipment.
- Official company contact and factory addressWuhan Andxin · 2026-10-11 · Manufacturer source
Andxin's factory address in the Wuhan Economic and Technological Development Zone.
- ADX-BHW-30A original walk-in room listingWuhan Andxin · 2026-10-11 · Manufacturer source
Specification table for the ADX-BHW-30A walk-in room.
- Battery-project application articleWuhan Andxin · 2026-10-11 · Manufacturer source
Andxin's article on custom battery test rooms and the protections used on those projects.
- ADX-TH-100B original sample prohibitionsWuhan Andxin · 2026-10-11 · Manufacturer source
Listing for the ADX-TH-100B chamber with its 0°C to 150°C range and banned sample types.
- Wu Ke [2023] No.56 technology-enterprise subsidy allocationWuhan Municipal Science and Technology Bureau · 2026-10-11 · Public original record
Wuhan subsidy document whose entry 995 names the company among enterprises first recognised as high-tech in 2022.
Read original record ↗
Confirm in writing before ordering
- The contracting entity, its registered English name and current 2026 certificates.
- Which battery samples are permitted in the model you buy, and the fault protections fitted.
- Loaded temperature and humidity performance with your fixtures.
- Overseas commissioning, service response and spare parts at your site.
- How the chamber's data output links to your battery test system.