Battery Manufacturing EquipmentIntelligent High-Vacuum Battery Oven
Xinyuren's intelligent high-vacuum battery oven dries electrode rolls or assembled cells under raised temperature and high vacuum, with capacity configured to your production needs. Xinyuren also offers an RGV-served oven system and a continuous vacuum line, so the quote should start from your workpiece and the way it moves between cycles.
What the oven does and what to size
The oven dries battery electrodes or cells using heat and high vacuum. Xinyuren says capacity is configured to the production requirement. The category page gives no chamber volume, vacuum endpoint or cycle time for a fixed model, so these come with your quote.
An electrode-roll load and a tray of assembled cells need different loading descriptions. Send the workpiece dimensions, fixture layout, incoming moisture and the release criterion you need. Ask for a chamber drawing and the maximum accepted load for that layout, which together turn the catalogue category into a sized machine.
| Parameter | Published value | Record status |
|---|---|---|
| Configuration | Selected for production requirement | known |
| Process | Thermal high-vacuum drying | known |
| Supported workpiece | Battery electrodes and cells | known |
Catalogue values apply to the configuration and test method the maker states. Ask for the values that apply to your configuration.
Source references: s2
How material moves between drying cycles
In the RGV arrangement, a rail-guided vehicle stores and fetches material while each oven runs on its own under a shared schedule. The continuous vacuum line moves material through a tunnel with different pressure and temperature zones. These are two different designs, each separate from the standalone oven.
For an RGV proposal, check rail access, oven availability and what happens when one chamber is out of service. For continuous transport, ask for the pressure-zone layout and how material enters and leaves while the process conditions hold. In both cases, settle the handover downstream and how dried material is protected.
Source references: s2
Moisture results alongside chamber records
Reaching a set temperature or vacuum in the chamber tells you about the chamber. Final moisture in each workpiece is measured on the workpiece. Agree sampling positions and the moisture test method before a loaded trial, and link each sample to its load position and cycle record.
The acceptance plan should also cover interrupted cycles, batch identification and approval to unload. Ask Xinyuren for trial data and current compliance documents for the configuration quoted. The district directory gives business background; the drying endpoint for your material comes from your trial.
Xinyuren's profile compares the batch, RGV and continuous oven formats it offers, and dried cells go straight to electrolyte filling in the cell assembly sequence; the RFQ guide shows how to write the loading and moisture questions.
Buying guidance from BatteryEquip.
Questions that change the purchase
| Decision | What the catalogue says | Next step |
|---|---|---|
| Which loading route is needed? | Xinyuren lists the standalone oven, the RGV baking line and the continuous vacuum line as separate offers. | Mark trays, loading access and transfer points on a layout drawing. |
| What proves the drying result? | The page gives no vacuum endpoint or moisture figure. | Agree loaded temperature mapping, endpoint sampling and recovery tests. |
Equipment questions
Does the oven come with the RGV system?
No. Xinyuren lists the oven and the RGV baking line separately. Ask for an equipment schedule naming the loading equipment, the number of ovens, the scheduling controls and the interfaces upstream and downstream.
Source s2What daily output can I expect?
The catalogue does not say. Chamber size, accepted load, cycle time and handling time are all open. Get those figures for your workpiece and then calculate output.
Source s2Prepare the supplier conversation
Fill in the conditions below and ask the supplier to answer each open point in writing. Copying or downloading stays in your browser; nothing is sent.
Sources and check dates
The maker's own pages and public records used for this page, each with the date it was checked.
s1 · Company and supply-scope record
Shenzhen Xinyuren Technology Co., Ltd. · Manufacturer-origin source
Xinyuren's company overview and battery-equipment range.
Archived source check: 2026-10-07
s2 · Intelligent High-Vacuum Battery Oven
Shenzhen Xinyuren Technology Co., Ltd. · Manufacturer-origin source
Category page describing the high-vacuum oven and its configurable capacity.
Archived source check: 2026-10-07
s3 · Official portfolio context
Shenzhen Xinyuren Technology Co., Ltd. · Manufacturer-origin source
Xinyuren's RGV baking line and continuous vacuum line, for comparison with the standalone oven.
Archived source check: 2026-10-07
s4 · Xinyuren company introduction in a district directory
Longgang District government · Public original record
District directory entry on Xinyuren's battery automation business.
Archived source check: 2026-10-07
Read original record →Still to confirm
- Whether the quote covers a single oven, an RGV-served system or the continuous vacuum line.
- Chamber volume, maximum load, vacuum endpoint and cycle time for your workpiece.
- Residual moisture after a loaded cycle, measured at agreed positions.
- How dried material is protected on its way to filling.
Batch high-vacuum drying of electrodes and cells
- Tray and load geometry
- Chosen transfer route
- Moisture and temperature criteria
- Loaded-cycle and interruption acceptance