Battery Manufacturing EquipmentLithium-metal solid-state battery pilot line
Mikrouna's lithium-metal solid-state battery pilot line processes lithium-metal-anode cells in a fully sealed, ultra-dry space with dew point held below −70 °C. It is designed for lithium metal, sulfide electrolytes and other moisture-sensitive materials in development and pilot work.
By MIKROUNA
Sealed, ultra-dry processing
Mikrouna's page describes making lithium-metal-anode solid-state batteries in a fully sealed, ultra-dry space, with dew point controlled below −70 °C. It names lithium metal, sulfide electrolytes and other moisture-sensitive components as the intended materials.
The page gives no cell format, production rate or full station list. Ask for the process map: material entry, film and electrode preparation, assembly, transfer and unloading, with the atmosphere held at each step. Ask also for readings at the workpiece during loading and after an interrupted cycle, since the headline dew point describes the enclosure.
| Parameter | Published value | Record status |
|---|---|---|
| Environment | Fully sealed ultra-dry processing enclosure | known |
| Published dew point | Below −70 °C | known |
| Intended inputs | Lithium-metal anode and moisture-sensitive solid-state battery components | known |
Catalogue values apply to the configuration and test method the maker states. Ask for the values that apply to your configuration.
Source references: s2
Recovery of the atmosphere and material handover
State how sensitive your materials are, how much exposure is allowed and where measurements are needed. Ask for sensor calibration and a record from loaded operation, including transfer-door use and recovery after access. Find out how oxygen is monitored and what other controls your material needs, since dew point covers moisture only.
Pilot acceptance should name your chemistry and sample route and tie results to the enclosure records. Ask the supplier for a validated process on your sulfide or lithium-metal materials, and for equipment compliance documents for your market.
Buying guidance from BatteryEquip.
Who controls the atmosphere at each transfer
Mark the controlled spaces, loading points and sample-transfer route on the pilot-line drawing. Ask the supplier which sensors watch each boundary, how they are checked and which records go with a material transfer. The cabinet dew point tells you little about the atmosphere around a sample during loading or unloading, so measure there too. Have qualified process and safety specialists set the requirements for your chemistry.
Ask for the operating envelope, interlock description and recovery instructions for the equipment offered. Agree a supervised acceptance of the stated controls using approved procedures and suitable test materials. Assign gloves, seals, consumables, atmosphere services and waste handling in the handover package. Qualify the chemistry as a separate task from checking the equipment functions, and run experiments only within the system limits Mikrouna approves.
Pilot cells from such a line still need formation under pressure and temperature control, as the formation and capacity grading page explains.
Buying guidance from BatteryEquip.
Questions that change the purchase
| Decision | What the catalogue says | Next step |
|---|---|---|
| Which atmosphere boundary is controlled? | The page gives a dew point below −70 °C for the enclosure. | Set oxygen and moisture measurement points and the sample-transfer route. |
| Who qualifies the chemistry and operation? | The page describes the equipment and its intended materials only. | Agree specialist-set operating limits, interlocks and handover documents. |
Equipment questions
Does below −70 °C describe every operating condition?
No. It is Mikrouna's catalogue target. Ask for readings at defined sensor positions during loading, processing and recovery, with allowed excursions written down.
Source s2Does the government report validate the pilot-line output?
No. It describes glovebox manufacturing and the company's business direction. Plan a cell-process trial and an acceptance schedule for this line.
Source s4Prepare the supplier conversation
Fill in the conditions below and ask the supplier to answer each open point in writing. Copying or downloading stays in your browser; nothing is sent.
Sources and check dates
The maker's own pages and public records used for this page, each with the date it was checked.
s1 · Company and supply-scope record
MIKROUNA · Manufacturer-origin source
Mikrouna's company overview of its enclosure and battery-equipment business.
Archived source check: 2026-10-07
s2 · Lithium-metal solid-state battery pilot line
MIKROUNA · Manufacturer-origin source
The product page describing the sealed ultra-dry process, dew-point target and intended materials.
Archived source check: 2026-10-07
s3 · Official portfolio context
MIKROUNA · Manufacturer-origin source
Mikrouna's gloveboxes and other battery-line equipment.
Archived source check: 2026-10-07
s4 · Jinshan production report on MIKROUNA
Shanghai government · Public original record
A Shanghai government report on Mikrouna's glovebox production and its solid-state plans.
Archived source check: 2026-10-07
Read original record →Still to confirm
- The dew point at the workpiece during loading, transfer and recovery.
- Oxygen monitoring and other controls for your materials.
- The process stations included and accepted cell output on your chemistry.
- Equipment compliance documents for your market.
Sealed dry-atmosphere pilot line for lithium-metal cells
- Chemistry and process route
- Atmosphere and transfer boundaries
- Measurement and interlock acceptance
- Qualified operating and maintenance procedures