Battery Manufacturing EquipmentCT5003AK 5V300A battery tester
The LAND CT5003AK 5V300A is a power-battery cell tester in Wuhan LAND's energy-saving CT500 series. Its name gives 5 V and 300 A, which suits large-format cells and high-current pulse work; ranges, channels and accuracy come from the model datasheet.
By LANHE / Wuhan LAND · CT5003AK 5V300A
What the model name tells you
LAND's energy-saving power-battery category lists the CT5003AK 5V300A next to other CT500-series models. The name gives five volts and 300 A. The category page lists no minimum current, accuracy formula, channel count, power envelope or limits on running channels together.
Ask for the model's current datasheet before comparing it with a multi-range or independent-channel system. If energy saving matters to your budget, ask LAND for measured conversion efficiency and the expected energy use on your test programme.
| Parameter | Published value | Record status |
|---|---|---|
| Model designation | CT5003AK 5V300A | known |
| Official category | Energy-saving power-battery testing | known |
| Application boundary | Cell testing; separate from a complete PACK manufacturing line | known |
Catalogue values apply to the configuration and test method the maker states. Ask for the values that apply to your configuration.
Source references: s2
Send the test programme first
Give the cell voltage limits, charge/discharge currents, dynamic steps and the number of channels you will run at once. Ask for the measurement ranges and calibration conditions at those operating points. Describe your fixtures and cables so connection effects are considered along with the instrument.
Check the software version, the exported data fields and what happens after a power or network interruption. If temperature equipment is part of the order, find out how it connects and how its readings are synchronised with the cell record. Ask LAND for a sample test file and a calibration report for the model.
Buying guidance from BatteryEquip.
Keep range, connection and data settings together
Ask for a controlled specification of your exact CT5003AK configuration, covering current and voltage ranges, uncertainty and any limits that depend on the connection. The model name identifies the unit, and that sheet defines it. Before comparing offers, list your smallest current, planned endpoints and timing needs.
Check the operating points that matter with calibrated references and an agreed programme. Open an exported test and look at step transitions, time stamps, range changes and interruption markers. Store channel, fixture, cable, software version and temperature details with each file so later analysis can tell a set-up change from a cell effect. Ask how incomplete runs are recovered or closed off.
Buying guidance from BatteryEquip.
Agree the operating envelope and recovery duties together
Ask for a current CT5003AK datasheet that links voltage, current and power to the number of channels running at once. In the same proposal, state cable and fixture ratings, where sense leads are placed and the data-saving interval you need. The model name gives neither channel count nor accuracy formula.
For long tests, agree what happens to the sequence and data after a power or communication interruption and who helps recover them. LAND's service page explains how to arrange support; put response times for this model in a service agreement. The university CT3002A purchase is a separate model with its own calibration, power envelope and commercial terms.
LAND's profile lists its micro-current and high-current tester families, and the cell measurement page explains the DCIR pulse tests that a 300 A channel is often used for.
Questions that change the purchase
| Decision | What the catalogue says | Next step |
|---|---|---|
| Which electrical range supports the experiment? | The category page gives the model name with 5 V and 300 A and no range table. | Ask for the channel specification and calibration conditions. |
| Does the programme survive the real connection? | The page gives no fixture, cable or recording details. | Run the required steps and keep an export linked to the configuration. |
Equipment questions
Is 300 A available at every test voltage?
The name does not say. Ask for a voltage and current schedule and the limits for running channels together on this exact model.
Source s2Does this reference supply a PACK manufacturing line?
No. It is a cell tester. PACK assembly, BMS integration and PACK EOL testing need separate equipment.
Source s2Prepare the supplier conversation
Fill in the conditions below and ask the supplier to answer each open point in writing. Copying or downloading stays in your browser; nothing is sent.
Sources and check dates
The maker's own pages and public records used for this page, each with the date it was checked.
s1 · Company and supply-scope record
LANHE / Wuhan LAND · Manufacturer-origin source
LAND's company overview of its battery-test hardware and software.
Archived source check: 2026-10-07
s2 · CT5003AK 5V300A battery tester
LANHE / Wuhan LAND · Manufacturer-origin source
LAND's energy-saving category page where the CT5003AK 5V300A is listed.
Archived source check: 2026-10-07
s3 · Official portfolio context
LANHE / Wuhan LAND · Manufacturer-origin source
LAND's other tester families for lower-current or environmental testing.
Archived source check: 2026-10-07
s4 · Shandong University CT3002A self-procurement result, 9 September 2024
Shandong University asset and laboratory management department · Public original record
A university purchase record for LAND CT3002A test systems, a different model.
Archived source check: 2026-10-11
Read original record →s5 · Wuhan LAND annual-report disclosure-error accountability policy, announcement 2025-084
CNINFO / 武汉市蓝电电子股份有限公司 · Public original record
A listed-company governance policy filed by LAND in August 2025.
Archived source check: 2026-10-11
Read original record →s6 · Official remote and on-site service approach
武汉市蓝电电子股份有限公司 · Manufacturer-origin source
LAND's description of remote and on-site support, useful when negotiating service terms.
Archived source check: 2026-10-11
Still to confirm
- The CT5003AK current and voltage ranges, channel count, power envelope and accuracy formula.
- Whether 300 A is available across the full voltage range with all channels running.
- The service region and response time in your contract.
- How sequences and data are recovered after an interruption.
High-current cell testing
- Voltage and current programme
- Range-specific calibration requirements
- Fixture and cable arrangement
- Recording and interrupted-run behaviour